Internal Door Measuring

HOW TO MEASURE GUIDE FOR UPVC INTERNAL DOORS

All OUR INTERNAL UPVC DOORS ARE MEASURED IN THE SAME MANNER USING THE EXISTING FRAME AS A GUIDE

Measure the Width in millimetres

eg
	760mm

Take three Door Frame to Door Frame measurements as shown in fig 1 top the centre and bottom if these three measurements are the same your door is hung straight in the frame deduct 5 millimetres from the width obtained select the Edge Banded option on the order form.

If you have two or three different widths take the widest measurement and select the Edge Trim option on the order form this option allows you to plane the door to the correct width top to bottom.

Measure the height in millimetres

Take three measurements from Door Frame to the Floor as shown in fig 2 left side centre and right side deduct 5 millimetres for clearance this will give you the desired height you can now proceed to order your new upvc internal door

IMPORTANT NOTE

The onus is on you the customer to supply the correct measurements. Door Canopy and Window Centre cannot be held responsible for miss measures. If in doubt contact a local tradesman how is familiar with measuring or call us on Free phone 0808 178 4444 and one of our friendly staff will Assist with your query.

Product licensing scheme administered by the ACPO (Association of Chief Police Officers) ACPO identify known and new methods of crime and help industry to improve test standards and develop product solutions that combat those methods; licensed products will “design out crime” Doors must be tested to PAS 24 and must also adhere to the SBD guidelines to be certified SBD Design Guides set specification requirements that are additional to PAS 24:2007